<iframe src="//www.googletagmanager.com/ns.html?id=GTM-PVXQ5Z" height="0" width="0" style="display:none;visibility:hidden"></iframe>
Keeping your world up and running.®
© 2024 Fluke Corporation
Specifications subject to change without notice.

You can depend on Fluke tools to keep your world up and running.

Fluke® tools perform like champions in the most challenging utility-scale mining  environments. You can depend on Fluke tools to keep your world up and running.

Vibration Meter

Fluke 805 FC

Vibration Meter

The Fluke 805 FC Vibration Meter is the ideal screening device for the frontline mechanical troubleshooting of a variety of mechanical mine site assets that need repeatable, severity-scaled readings of overall vibration, bearing, and machine health. The Fluke 805 FC not only helps you prevent unscheduled downtime, but also helps you extend the operating life of your site’s machines by finding and fixing vibration-related problems early.

  • Convenient ‘daily check’ tool to measure overall vibration (10Hz to 1000Hz) for acceleration, velocity, and displacement

  • Record, transmit, and share measurement data with your team remotely with the Fluke Connect mobile app

  • Fault severity level is directly indicated on screen (with crest value for comparison)

Download Datasheet
Download Datasheet
Vibration Meter
Low frequency range (overall measurement)
4,000 Hz to 20,000 Hz
High frequency range (CF+ measurement)
64 MB RAM, 64 MB flash
Severity levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration limit
50 g peak (100 g peak-peak)
A/D converter
16-bit
Signal to noise ratio
80 dB
Sampling rate
Low frequency: 20,000 Hz, High frequency: 80,000 Hz
Real time clock backup
Coin battery
Sensor
Sensitivity
100 mV g ±10%
Measurement range
0.01 g to 50 g
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ±5% of measured value
Infrared Thermometer (Temperature Measurement)
Range
-20°C to 200°C
Accuracy
±2°C
Focal length
Fixed, at ~3.8 cm
External sensor
(Supported, but not provided)
Frequency range
10 Hz to 1,000 Hz
Bias voltage (to supply power)
20 VDC to 22 VDC
Bias current (to supply power)
Maximum 5 mA
Firmware
External interfaces
USB 2.0 (full speed) communication
Data capacity
Database on internal flash memory
Upgrade
Through USB
Memory
Up to 3,500 measurements
Environmental General Specifications
IP rating
IP54
Drop test
1 meter
Battery type
AA (2) Lithium Iron Disulfide
Battery life
250 measurements
Size (L x W x H)
24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in)
Weight
0.40 kg (0.89 lb)
Connectors
USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)
Vibration Meter

Roles



Applications

How would you like to purchase?

Talk to a Fluke Specialist

Thank you for contacting us, we will be in touch with you shortly.

Unfortunately there was an issue submitting your request. Please Try again.

Your privacy is important to us

Follow us